Product(s): SELECTserver Version(s): 09.01.00.xx Environment: N/A Area: Installation / Configuration Subarea: Windows Installer Errors Error or Warning Message When installing SELECTserver 9.1.x, the following error may occur: Bentley SELECTserver Setup (64 bit) Setup Wizard ended prematurely Bentley SELECTserver (64 bit) Setup Wizard ended prematurely because of an error. Your system has not been modified. To install this program at a later time, run Setup Wizard again. Click the finish button to exit the Setup Wizard. Explanation A fatal error has occurred, causing the installation to roll back all changes. A disabled Windows Firewall service is one of the most common reasons, causing errors when the installer attempts to modify firewall rules for the SELECTserver administration site and SELECTserver Gateway. How to Avoid To determine whether the Windows Firewall service is the source of the installation errors: Open the Windows Start menu or Start screen. Do a search for Services.msc, and press Enter. Locate Windows Firewall in the list, and determine whether the Startup Type is Disabled. If set to Disabled or if the Status column next to it is blank, right-click on the service, and select Properties from the Contextual menu. In the window that appears, select Manual from the Startup Type drop-down menu, and click the Apply button. Click the Start button. Keep the Windows Firewall Properties window open. Run the SELECTserver installation. It should complete successfully now. Once finished, return to the Windows Firewall Properties window, and click the Stop button. The Startup Type can optionally be set to Disabled again. Original Author: Jeremy Hoesly
↧